CERTIFIED 060-1310-2 Guide D'utilisation page 23

22
model no. 060-1310-2 I contact us: 1-844-428-7277
Keep the machine running for a few minutes after use to prevent freezing of the auger paddle and
moving parts. Stop the engine, wait for all moving parts to stop, and remove ice and snow from the
machine. Clean off any snow and ice from the base of the chute. Rotate the discharge chute left and
right to free it from any ice buildup. With the ignition key in the off position, pull the recoil starter
handle several times to prevent the recoil starter from freezing up. In snowy and cold conditions,
some controls and moving parts may freeze. Do not use excessive force when trying to operate
frozen controls. If you have difficulty operating any control or part, start the engine and let it run
for a few minutes.
Operating Tips
WARNING: The auger paddle can eject stones, toys, and other foreign objects and cause
serious personal injury to the operator or to bystanders.
Keep the area to be cleared free of all objects that the auger paddle could pick up and eject.
Keep all children and pets away from the operating area.
For operation
Remove the snow as soon as possible after it falls. Overlap each swath to ensure complete snow
removal. Discharge the snow downwind whenever possible.
LED Light
The LED light will be turn on when you start the machine and will be off when stop the machine.