CERTIFIED 060-1310-2 Guide D'utilisation page 22

Deflector
Adjust the rotation handle right or left to change
the thrower direction of the snow (Fig. 19).
Move the chute deflector up or down to control
discharge distance. (Fig. 20).
Clearing a Clogged Discharge Chute
Important: Hand contact with the rotating auger paddle inside the discharge chute is the
most common cause of injury associated with snowblowers. Never use your hand to clean out
the discharge chute.
CAUTION: Ensure the snowblower is completely shut off.
Wait 10 seconds to be sure the auger paddle has stopped rotating.
Always use a tool to clean out the chute, never use your hands.
Self-propelling the Snowblower
Lift the machine handle until the wheels are just off the ground and the scraper and auger paddle touch the
ground. The machine will propel forward.
Note: By slightly varying lifting force on the handle, you can control the forward speed of the
machine. In heavy snow, push forward on the handle if necessary, but let the machine work at
its own pace. Do not lift the handle any more than necessary, because the scraper will lift off
the ground and snow will escape behind the machine.
Preventing Freezing after Use
21
Fig. 19
fuel rotation
handlevalve
lever
Fig. 20