Battery Gauge And Charging The Batteries; Disassembling Battery Box - Invacare Scorpius Livret D'instructions

Masquer les pouces Voir aussi pour Scorpius:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Scorpius
How to unfold the scooter (Figure 20):
1. Place the scooter on a flat ground and lay down the scooter. Make sure the rear wheels lie on the ground
before unfolding the scooter.
2. Pull the release lever. (Tip: Before pulling the lever, you can press down the tiller a little bit. Such action
helps to easier release the lever).
3. Pull the tiller upwards.
4. When folding and unfolding, the seat shall automatically shift to its position. However, please double
check and manually push the seat to its locked position (green) if necessary.
5. Slide the seat forwards to the green point to lock the seat. You will hear a click sound when the seat is
locked to its position.
6. Flip up the seat back and double check if lock is in its position before you get on the scooter.
Figure 20
Please turn off the power on flat ground before folding /
unfolding. The scooter can only be folded / unfolded
when its power is off.
Do not pull the lever when the scooter is folded and
standing (refer to right picture).
If there is any abnormality during folding / unfolding, the
action will stop. See section 8.
Please make sure the N-D lever is switched to D position
before folding / unfolding to avoid scooter sliding. See
section 4-4.

BATTERY GAUGE AND CHARGING THE BATTERIES

6.1 DISASSEMBLING BATTERY BOX

Each battery box contains one lithium battery or two lead-acid
batteries (optional).
The battery box is designed for a better stability. Please follow the
instruction to disassemble the battery box (Figure 21). Push the
battery backwards (1.) and pull it upwards (2.).
It is highly recommended not to remove the battery box if not
necessary. Always keep the battery box installed on the scooter.
If for any reason the battery box was removed, please make sure the
connectors are in sequence and in position when putting it back to
scooter.
When putting battery box back to scooter, gently press battery box downward to make sure it is
firmly connected to the scooter.
Do not disassemble battery box and open sealed parts by yourself to prevent electric shock and
damage to the battery.
Maintenance and repair must only be carried out by a competent engineer or authorized dealer.
Please contact the dealer if you need to replace the internal battery.
1654767~A_
Instruction Booklet
15

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Scorpius-a

Table des Matières