Replacement Parts And Accessories; Before Using For The First Time - Bosch BSGL3 Serie Mode D'emploi

Replacement parts and accessories

A Replacement filter package
To get the most out of your appliance, we recom-
mend using G ALL genuine replacement bags.
Contents:
- 4 dust bags with fasteners
!
PLEASE NOTE
We therefore recommend that you only use our origi-
nal dust bags.
Your appliance is a highly efficient vacuum cleaner
that achieves excellent cleaning results when used
with high-quality dust bags. Only by using high-
quality dust bags (such as Bosch original dust bags)
can you ensure that your vacuum cleaner is working
at the energy efficiency class, dust pick-up rate and
dust retention capacity listed on its EU energy label.
The use of inferior-quality dust bags (e.g. paper
bags) can have a negative effect on the service life
and performance of your appliance. Using unsuitable
or inferior-quality dust bags can also damage your
vacuum cleaner. Such damage is not covered by our
guarantee.
You can find more information about this at
www.bosch-home.com/dust-bag. You can order our
original vacuum cleaner bags here.
B Textile filters (permanent filters) BBZ10TFG
Reusable bag with Velcro(R) fastener.
C Hepa filter BBZ153HF
Additional filter for cleaner exhaust air.
Recommended for allergy sufferers. Replace once a
year.
D Micro-active carbon filter BBZ192MAF
Combination of micro filter and active carbon filter.
Combats unpleasant odours. Replace twice a year.
Replace carbon filter frame with micro filter frame.
Please note! It is not possible to combine a Hepa
filter and a Micro-active carbon filter.
E TURBO-UNIVERSAL Hard-floor brush BBZ123HD ®
For vacuuming hard floors (parquet flooring, tiles,
terracotta, etc.)
brush for upholstery BBZ42TB

Before using for the first time

1*
Figure
Push the handle onto the flexible tube and until it
engages.
2*
Figure
Push the crevice nozzle and upholstery nozzle back
into the accessories holder as indicated.
Setting up
3
Figure
a)Push the flexible hose adapter into the air intake
opening on the vacuum cleaner lid until it engages.
b)To remove the flexible hose, press the two lugs
together and pull the tube out.
4*
Figure
a) Connect the handle and the telescopic tube together.
b)Push the handle into the telescopic tube until
it engages.
Press on the locking collar and pull out the
telescopic tube to disconnect.
5*
Figure
a) Connect the floor tool and the telescopic tube
together.
b)Push the telescopic tube into the connecting piece of
the floor tool until it engages.
Press on the locking collar and pull out the
telescopic tube to disconnect.
6*
Figure
To adjust the length of the telescopic tube, adjust
the adjusting sleeve/sliding switch in the direction of
the arrow and adjust the tube to the required length.
7
Figure
Holding the power cord by the plug, pull out the
required length and plug it into the mains socket.
8
Figure
Press the on/off button in the direction of the arrow
to switch your vacuum cleaner on/off.
Controlling the suction level
9
Figure
Adjust the suction by turning the on/off button in the
direction of the arrow.
The suction level can be infinitely adjusted to the level
required by turning the control knob in the direction of
the arrow.
Low power range
For vacuuming delicate materials, e.g. delicate
upholstery, curtains, etc.
Medium power range
For daily vacuuming of lightly soiled floors.
High power range
For vacuuming durable floor coverings, hard floors
and surfaces with heavy deposits of dirt.
* Depending on model
=>
=>
=>
49