Replacement Parts And Special Accessories; Before Using Your Appliance For The First Time; Initial Use - Bosch Relaxx'x Ultimate BGS7 Serie Mode D'emploi

Replacement parts and special accesso-
ries
A Hard-floor nozzle BBZ123HD
For vacuuming hard floors
(parquet, tiles, terracotta, etc.)
B Hard-floor nozzle BBZ124HD
With 2 rotating brush rollers
For caring for expensive hard floors
and for the improved collection of
coarse dirt.
Before using your appliance for the first
time
1
Fig.
Push the handle onto the flexible hose and lock it in
place.

Initial use

2
Fig.
a) Push the flexible tube adapter into the air intake
opening on the appliance and lock it in place. You
will hear an audible 'click'.
b) To remove the flexible hose, press the two catches
together and pull out the hose.
3*
Fig.
a) Push the handle into the telescopic tube. To remove
it, turn the handle slightly and pull it out of the
tube.
b) Push the handle into the telescopic tube until it
locks into place. To release the connection, squee-
ze the collar sleeve and pull the handle out.
4
Fig.
a) Insert the telescopic tube into the connecting piece
of the floor tool. To release the connection, turn the
tube slightly and pull it out of the floor tool.
b) Push the telescopic tube into the connecting piece
of the floor tool until it locks in place. To release
the connection, press on the locking collar and pull
out the telescopic tube.
5*
Fig.
Unlock the telescopic tube by moving the sliding
switch in the direction of the arrow and adjust to
the desired length. The slide resistance on carpet
is at its lowest when the telescopic tube has been
completely pulled out.
42
6*
Fig.
a) Place the accessories holder in the required positi-
on on the telescopic tube.
b) Use some pressure to insert the upholstery nozzle
with brush ring and the crevice nozzle into the ac-
cessories holder from above or below.
7
Fig.
Holding the power cord by the plug, pull out to the
required length and insert the plug into the mains
socket.
8
Fig.
To switch the vacuum cleaner on or off, press the
ON/OFF button.
9
Fig. Controlling the suction level
Turn the rotary control to infinitely adjust the suction
level to the level required.
min - For vacuuming curtains and delicate textiles
- For vacuuming upholstered furniture and
cushions
- For vacuuming delicate rugs und for daily
vacuuming of lightly soiled floors
- For vacuuming durable floor coverings
max - For vacuuming hard floors and heavily soiled
rugs and carpets
Vacuuming
!
Caution
Floor tools are subject to a certain amount of wear,
depending on the type of hard floors you have (e.g.
rough, rustic tiles). Therefore, you must check the
underside of the floor tool at regular intervals. Worn
undersides of floor tools may have sharp edges that
can damage sensitive hard floors, such as parquet or
linoleum. The manufacturer does not accept any re-
sponsibility for damage caused by worn floor tools.
10
Fig.
Set the adjustable floor nozzle:
Rugs and carpets =>
Hard floors/parquet =>
If you are vacuuming up larger particles, make sure that
you vacuum them up successively and carefully to en-
sure that the vacuum channels of the floor tool do not
become blocked.
If necessary, you should raise the nozzle in order to
better vacuum up the dirt particles.
* Dependent on model