Replacement Parts And Special Accessories; Your Vacuum Cleaner; Before Using Your Appliance For The First Time; Initial Use - Bosch Relyy'y BGC3 Mode D'emploi

en
Congratulations on your purchase of the Bosch Relyy`y
vacuum cleaner.
This instruction manual describes various Relyy`y mo-
dels, meaning that some of the equipment features
and functions described may not be available on your
model. You should only use original Bosch accessories,
which have been specially developed for your vacuum
cleaner, in order to achieve the best possible vacu-
uming results.
Please keep this instruction manual for future refe-
rence. When passing the vacuum cleaner on to a third
party, also pass on this instruction manual.
Fold out the picture pages.

Your vacuum cleaner

1 Adjustable floor tool* (For the same functions, the
appearance of the nozzle may differ from the picture)
2 Telescopic tube with sliding switch but without acces-
sory connection*
3 Telescopic tube with adjusting sleeve and accessory
connection*
4 Flexible hose
5 Handle
6 Foam filter
7 Parking aid on the back of the appliance
8 Exhaust filter lid
9 Power cord
10 Appliance lid
11 Foam filter lid
12 On/off button with electronic suction regulator
13 Filter control display (Sensor Control)
14 Dust container with carrying handle
15 Storage aid on the underside of the appliance
16 Fluff filter cover
17 Professional upholstery nozzle*
18 Professional crevice nozzle*
19 Accessories holder*
20 Upholstery nozzle
21 Crevice nozzle
22 Brush ring (for fitting on the upholstery nozzle)*
23 Drill dust nozzle*
24 Hard-floor nozzle*
25 Hard-floor nozzle*
44
All manuals and user guides at all-guides.com
Replacement parts and special accesso-
ries
A Hard-floor nozzle BBZ123HD
B Hard-floor nozzle BBZ124HD
Before using your appliance for the first
time
Fig.
‡

Initial use

Fig.
‡
Fig.
a) Telescopic tube without accessory connection:
b) Telescopic tube with accessory connection:
Fig.
a) Nozzle without accessory connection:
b) Nozzle with accessory connection:
Fig.
‡
Fig.
a) Place the accessories holder in the required positi-
b) Use some pressure to insert the upholstery nozzle
* Dependent on model
For vacuuming hard floors
(parquet, tiles, terracotta, etc.)
With 2 rotating brush rollers
For caring for expensive hard floors
and for the improved collection of
coarse dirt.
1
Push the handle onto the flexible hose and lock it in
place.
2
Push the flexible hose adapter into the air intake
opening on the appliance and lock it in place. You
will hear an audible 'click'.
3*
Push the handle into the telescopic tube.
Push the handle into the telescopic tube until it
locks into place.
4*
Push the telescopic tube into the connecting piece
of the floor nozzle.
Push the telescopic tube into the connecting piece
of the floor nozzle until it locks in place.
5*
Unlock the telescopic tube by moving the sliding
switch or adjusting sleeve in the direction of the ar-
row, and adjust it to the desired length. The slide
resistance on carpet is at its lowest when the tele-
scopic tube has been completely pulled out.
6*
on on the telescopic tube.
with brush ring and the crevice nozzle into the ac-
cessories holder from above or below.