Function - EKOM Invent DK50 DI Manuel De L'utilisateur

EQUIPMENT DESCRIPTION

FUNCTION

Description
The DK50 DI medical compressor is a portable air compressor designed to
supply air to medical ventilators. Optional equipment is stand. Assembly
compressor with stand is a mobile device. Integrated oil-free piston pump
continuously compresses air, which is then cooled, filtered and dried. The
compressed air is fed into an internal tank with a defined pressure range.
Backup compressed air source
The equipment is connected to the central air distribution line of hospital and
medical ventilator is connected to the outlet air connector of device.
Compressed air in the central distribution line is measured by the pressure
sensor. The compressor remains in STANDBY mode when the pressure
level is sufficient. If the pressure drops, the controller automatically starts up
the compressor.
Primary compressed air source
The compressor continuously supplies compressed air for use with the
medical ventilator if not connected to a central compressed air line.
Warning:
The user is obliged to secure a suitable backup compressed air source
if compressed air deliveries from the compressor are interrupted. The
manufacturer cannot assume any liability for any damages that occur in
connection with an interruption of compressed air deliveries to a
patient.
12 NP-DK50 DI-17_03-2021