Use; Warnings For Installation And; Xg/Xgr Technologies; Operating The Grinder-Doser - Fiorenzato XGR Manuel D'instructions

USE

This grinder-doser has been designed
solely for grinding coffee beans . Any other
use must be understood as improper, and
consequently hazardous . The manufacturer
cannot be held responsible for any damage
as a result of improper or incorrect use . Do
not use the grinder-doser for grinding other
types of food, or anything else . The grinder-
dosers and coffee grinders manufactured
by our company are intended for skilled
personnel for professional use only, not for
household use .
WARNINGS FOR INSTALLATION
AND ELECTRICAL CONNECTIONS
The grinder-doser must be installed by
skilled technical personnel in compliance
with the safety regulations in force . Incor-
rect installation may result in injury to peo-
ple, animals or things, for which the manu-
facturer cannot be held responsible .
• The grinder-doser must be placed on a
stable, flat surface .
• Before plugging in the grinder-doser,
make sure the voltage and frequency val-
ues of the supply mains correspond to the
ratings indicated on the label featuring the
grinder-doser technical data .
• The wall socket must be fitted with an ef-
ficient earth contact . Consequently, it is
essential to make sure the earth system
is efficient and in conformity with current
safety regulations . If in any doubt, have
the system thoroughly checked by per-
sonnel with the appropriate professional
skills .
• It is compulsory to earth the grinder-dos-
er . The manufacturer cannot be held re-
sponsible in the event of non-observance
of this regulation .
• It is essential to make sure the ratings
of the system are suitable for the power
absorbed by the grinder-doser (as indi-
cated on the label featuring the technical
data) and that the wall socket is protected
against over currents .
• Do not use extension cables, plug adapt-
ers for multiple sockets or makeshift con-
nections .
• The motor must rotate clockwise . If the
rotation of threephase motors is to be in-
verted, by inverting the two power supply
wires inside the plug, this must be carried
out by skilled personnel .

XG/XGR TECHNOLOGIES

• XG models are fitted with a calibration
plate with the innovative automatic weigh-
ing calibration system .
• XGR models have a calibration plate with
the automatic weighing calibration system
and RFID technology that automatically
recognises whether a single or double fil-
ter holder cup is being used .
OPERATING
THE GRINDER-DOSER

CORRECTLY CONNECTING

THE CALIBRATION PLATE
TO THE GRINDER-DOSER
WARNING: During this phase, the grinder-
doser must be disconnected from the elec-
tric socket . To correctly connect the coffee
grinder-doser to the calibration plate, it
is necessary to use the electric cable that
comes out under the calibration plate, con-
necting it to the electric connector posi-
tioned under the grinder-doser (see Fig . 1 ) .
Fig . 1
Then place the calibration plate on the cen-
tering bracket of the grinder-doser and plug
it into the electric socket
23