Use; Installation And Wiring; Operating The Grinder-Doser; Led Operation - Fiorenzato F83 Manuel D'instruction

USE

This grinder-doser has been designed solely for
grinding coffee beans. Any other use is
understood to be improper, and consequently
hazardous. The manufacturer cannot be held
responsible for any damage as a result of
improper or incorrect use. Do not use the
grinder-doser for grinding other types of food, or
anything else.
The coffee grinders and coffee grinder-dosers
manufactured by our company are intended for
skilled personnel only for professional use and
not for household use.

INSTALLATION AND WIRING

The grinder-doser must be installed by skilled
technical personnel in conformity with the safety
rules in force. Incorrect installation may result in
injury of persons or animals, or damage to
property, for which the manufacturer cannot be
held responsible.
• The grinder-doser must be placed on a stable,
flat surface.
• Before plugging in the grinder-doser, make
sure the voltage and frequency values of the
supply mains correspond to the ratings
indicated on the label featuring the grinder-
doser's technical data.
• The wall socket must be fitted with an
efficient earth contact. Consequently, it is
essential to make sure the earth system is
efficient and in conformity with current safety
rules. If in any doubt, have the system
thoroughly checked by personnel with the
appropriate professional skills.
• It is compulsory to earth the grinder-doser.
The manufacturer cannot be held responsible
in the event this regulation is not complied
with.
• It is essential to make sure the ratings of the
system are suitable for the power absorbed
by the grinder-doser (as indicated on the
label featuring the technical data) and that
the wall socket is protected against over
currents.
• Do not use extension cables, plug adapters
for multiple sockets or makeshift connections.
• The motor must rotate clockwise. If the
rotation of threephase motors is to be
inverted, by inverting the two power supply
wires inside the plug, this must be carried out
by skilled personnel.
OPERATING
THE GRINDER-DOSER
PRELIMINARIES
Make sure the hopper is positioned correctly on the
grinder-doser and is fastened to the upper grinding
blade holder by means of the relevant screw. Close
the locking slide and fill the hopper with coffee
beans. Open the locking slide so that the beans are
allowed to drop into the grinding system.
Hopper safety
screw
SWITCHING THE GRINDER-DOSER ON AND OFF
On: set the switch to 1.
Off: set the switch to 0.

LED OPERATION

Off: grinder off.
On: grinder on.
Flashing: the grinder is grinding (the motor is
working).

SELECTION BUTTONS

The control panel has three blue LED buttons for
selecting the quantity required for grinding.
When pressed, an acoustic sound is released:
C1: single dose.
M: continuous manual grinding.
C2: double dose.
C1
20
M C2