Further Recording Possibilities - Philips CDR-800 Mode D'emploi

xp CDR 800/17.1 eng. 25-07-2001 15:12

Further recording possibilities

High speed recording of an entire disc, a track, a
program or a A-B edit
1 Make sure the CDR(W) is absolutely free of scratches and
dust particles and insert it into the CD recorder tray.
2 Press either CD 1, CD 2 or CD 3 to select the disc you
wish to record from.
3 Press RECORD on the set to enter into the recording
menu.
Rotate the ¡ EASY JOG ™ control to select one of the
4
following high speed record modes:
If a disc from the CD changer is selected:
REC CD X FAST ?: for high speed recording of an
entire disc.
Continue with step 5.
0
REC TR FAST ?: for high speed recording of a track.
Press YES to confirm.
0
Rotate the ¡ EASY JOG ™ control to select the
0
required track.
REC TR NN ? is displayed.
Continue with step 6.
0
If a program is available:
PROG FAST ?: for high speed recording of the selected
program.
If a A-B edit is available (see "A-B Editing"):
A-B FAST ?: for high speed recording of the A–B track.
5 Press YES to confirm your selection.
The arrow starts blinking.The remaining recording time
of the CDR(W), the total recording time of the
CDR(W) and either RECORD CD1 (or 2, 3)?, REC
PROG ? or REC A-B ? are displayed.
6 Press YES to start high speed recording.
The arrow lights,
speed recording starts and the actual recording time left
starts to count down.
Do not forget to finalize!
Pagina 21
is shown, high
RECORD IN PROGRESS
Internal recording
Normal recording and listening of an entire disc, a
track, a program or a A-B edit
1 Make sure the CDR(W) is absolutely free of scratches and
dust particles and insert it into the CD recorder tray.
2 Select the required disc by pressing CD1, CD2 or CD3.
3 Press RECORD to enter the recording mode.
Rotate the ¡ EASY JOG ™ control to select one of the
4
following normal record options:
If CD changer is selected:
REC CD X ?: for listening to the entire disc during
normal recording.
Continue with step 5.
0
REC TRACK ?: for listening to the track during normal
recording.
Press YES to confirm.
0
Rotate the ¡ EASY JOG ™ control to select the
0
required track.
REC TR NN ? is displayed.
Continue with step 6.
0
If a program is available:
REC PROG ?: for listening to the program during
normal recording.
If a A-B edit is available (see "A-B Editing"):
REC A-B ?: for listening to the A–B track during normal
recording.
5 Press YES to confirm your selection.
The arrow starts blinking.The remaining recording time
of the CDR(W), the total recording time of the CD, track
or program and RECORD ? are displayed.
6 Press YES to start recording.
The arrow lights,
RECORD IN PROGRESS
speed recording starts and the actual recording time left
starts to count down.
Do not forget to finalize!
is shown, normal
21