Analog Connections; Digital Connections - Philips CDR-800 Mode D'emploi

Masquer les pouces Voir aussi pour CDR-800:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

xp CDR 800/17.1 eng.
25-07-2001 15:12
Installation

Analog connections

These connections are required for playback and recording via
an amplifier/receiver, equipped with an analog in- and outputs.
3
1
Connect supplied audio cord between the ANALOG
OUT-jacks on the set and the ANALOG input jacks of the
amplifier/receiver (TAPE IN, CD-R, AUX or PLAY IN).
Insert the red plugs into the R jacks, and the white plugs
into the L jacks.
2
Connect supplied audio cord between the ANALOG IN-
jacks on the set and the analog outputs of the
amplifier/receiver (CDR OUT,TAPE OUT, AUX OUT, REC
OUT etc.).
Insert the red plugs into the R jacks, and the white plugs
into the L jacks.
3
Connect all other components of your system (tape deck,
CD player, tuner, record player etc.) via their ANALOG
OUT-jacks to the appropriate analog input jacks of the
amplifier/receiver (CD IN,TUNER IN, AUX IN, PHONO
IN etc.).
Any analog device, connected to the amplifier/receiver
can now be used as recording source (AUX ANALOG).
12
Pagina 12
RECORD PLAYER
CD PLAYER
3
AMPLIFIER/
RECEIVER
1
2
CD RECORDER

Digital connections

Direct digital coaxial connection
This connection is required for direct recording from a digital
coaxial source (e.g a CD player, DVD, DAT).
1
1
Connect a digital coaxial cord between the DIGITAL IN-
jack on the set and the DIGITAL OUT jack of the digital
source.
Recording can now be done via the digital coaxial input
(AUX DIGITAL).
Direct digital optical connection
This connection is required for direct recording from a digital
optical source (e.g. a CD player, DVD, DAT).
2
CD RECORDER
1
Remove the dust caps from the digital optical connections
of both source and CD recorder. Keep the caps in a safe
place.
2
Connect an optical fibre-optic cord
between the OPTICAL IN jack of
the set and the OPTICAL OUT jack
of the source.
Make sure you insert both plugs
fully, until a click is heard.
Recording can now be done via the digital optical input
(AUX OPTICAL).
CD PLAYER
CD RECORDER
CD PLAYER

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cdr800bkCdr 800

Table des Matières