Unfinalizing Cdrw Discs; Erasing From A Cdrw Disc - Philips CDR-800 Mode D'emploi

Masquer les pouces Voir aussi pour CDR-800:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

xp CDR 800/17.1 eng.
25-07-2001 15:12
(Un)finalizing, erasing
Unfinalizing CDRW discs
If you want to record (or erase) on (from) an finalized
CDRW, you have to unfinalize it first.
Notes:
Unfinalizing will take approximately 2 minutes.
After unfinalizing of the CDRW,
display.
1
Insert the CDRW you want to unfinalize in the CD recorder
tray.
2
Press CDR to select the CD recorder.
3
Press FINALIZE on the set.
UNFINALIZE CD ? is displayed.
4
Press YES to start unfinalizing.
UNFINAL is displayed and the operation time left starts to
count down.

Erasing from a CDRW disc

It is possible to erase one or more tracks (starting from the
end of the last track) or the entire CDRW. Erasing is only
possible on unfinalized CD-RW discs. If you try to erase a
finalized CD-RW, the disc will be unfinalized first before it will
be erased.
Erasing an entire CDRW
1
Insert the CDRW you want to erase in the CD recorder tray.
2
Press CDR to select the CD recorder.
3
Press ERASE CD to enter into the erasing menu.
ERASE DISC lights up.
4
Press YES.
ERASE ? lights up.
5
Press YES to start erasing.
ERASE is displayed and the operation time left starts to
count down.
Erasing one or more tracks
1
Insert the CDRW you want to erase in the CD recorder tray.
2
Press CDR to select the CD recorder.
3
Press ERASE CD to enter into the erasing menu.
ERASE DISC lights up.
Rotate the ¡ EASY JOG ™ control until the display shows:
4
ERASE TR and the track number (e.g. 10 +) light up.
Rotate the ¡ EASY JOG ™ control to select the track
5
number(s) you wish to erase.
6
Press YES.
ERASE ? lights up and the remaining disc time and the
remaining number of tracks are shown on the display.
7
Press YES to start erasing.
ERASE lights up and the operation time left starts to
count down.
24
Pagina 24
changes to
on the
CD
CDRW
Note:When erasing more tracks, the tracks to be erased
must be selected in sequence, starting from the last recorded
track. Example:The CDRW has 5 tracks recorded on it. Now,
you can erase track 5 and 4.You can also erase track 5, 4 and
3, however you cannot erase track 5 and 3!

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cdr800bkCdr 800

Table des Matières