Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Safety and operating instructions
Main parts
Drill steel retainer
A.
Air inlet nipple
B.
C.
Air flushing nipple
Labels
The machine is fitted with labels containing important
information about personal safety and machine
maintenance. The labels must be in such condition
that they are easy to read. New labels can be ordered
from the spare parts list.
Data plate
Machine type
A.
B.
Maximum permitted compressed air pressure
Serial number
C.
The warning symbol together with the book
D.
symbol means that the user must read the
safety and operating instructions before the
machine is used for the first time.
14
The CE symbol means that the machine is
E.
EC-approved. See the EC declaration which
is delivered with the machine for more
information. If the CE symbol is missing, it
means that the machine is not EC-approved.
Safety label
To avoid injury, before using or servicing tool, read
and understand separately provided safety
instructions.
Installation
Unpacking the rock drill
Plastic guards
Before the rock drill is first used remove all the plastic
guards in the hose nipples, venting holes, and
rotation chuck.
Lubricate
After unpacking and installing the machine, pour a
liberal amount of lubrication oil in the air connection.
Mounting machine attachment
The attachment point (B) on the underside of the
rock drill must be used as the main means of fixing
it to the cradle. To further secure the rock drill, a
support (C) must be fixed to the cradle.
Height to drill
centre (A) mm
53
Do not mount the front attachment (B) for the rock
drill by means of the side bolts, since this can
interfere with the internal alignment of the machine,
resulting in damage and reduced output. See
"Appendix A" for dimensional drawings of
attachments.
© 2010 Atlas Copco Construction Tools AB | No. 9800 0679 71 | 2010-03-29
BBD 94-DSI
Attachment
Attachment
bolt diameter
hole diameter
(B) mm
(C) mm
23-24
18
Original instructions
Publicité
Chapitres
Table des Matières
