Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Outputting images and audio from a computer
To audio out port
stereo mini jack
p
When using computer and video equipment alternately, swap the cable or use an audio switch.
Adjusting computer generated images
fAuto setup (Computer connections)
The computer signal is analysed and the following settings are adjusted to ensure the optimum image quality.
• Trackingg
• Position
• Sync.g
• You can set Auto setup to off in the "Image"
p
P.13
• When Auto setup is set to off, press the [Auto] button on the remote control to perform auto setup.
• If you press the [Auto] button during Freeze operation, or when a configuration menu is being displayed, the display will
be halted and auto setup will take place.
Adjust the Tracking and Sync settings manually if Auto setup cannot be performed. ([Menu] button → "Image" → "Picture
Quality" → "Tracking", "Sync.") s "Image menu" P.13
To monitor port
To Input B
port
Computer cable (optional)
stereo mini jack - 2RCA cable
(commercially available)
→
"Auto Setup" configuration menu. (The default is ON) s "Image menu"
Connecting Equipment
To Audio port
RCA jack
Connecting a Computer-
11
Publicité
Chapitres
Table des Matières
Dépannage
