Pattern 2: Connecting Via An Access Point Using A Wireless Lan; Pattern 3: Permanent Connection Using A Wired Lan - Epson EasyMP EMP-745 Guide De Mise En Route

Pattern 2: Connecting via an Access Point Using a
Wireless LAN
This method is recommended in the following cases.
• When you would like to connect to a network system (LAN) and project
images from several computers
• When you would like to use a wireless LAN to connect to a network
system (LAN)

Pattern 3: Permanent Connection Using a Wired LAN

This method is recommended in the following cases.
• When you would like to connect to a network system (LAN) and project
images from several computers
• If you would like to keep the projector connected at all times
You can project images from
several computers via the
network.
You can connect
to a LAN.
You can project images
from several computers via
the network.
You can connect to a LAN.
The projector can remain connected at all times, which is
useful for centralised control of projectors from a computer.
5