Epson EasyMP EMP-745 Guide De Mise En Route page 28

Tip :
• These settings only need to be made once, and will be kept from then on.
• Depending on the driver for the wireless LAN card that you are using, the window
display contents and button names that actually appear may differ from those given
here.
Procedure
1
While referring to the documentation for the wireless LAN card and
computer that you are using, carry out the following steps so that the
wireless LAN card can be used.
• Insert the wireless LAN card into the computer.
• Install the driver for the wireless LAN card.
2
Turn the power for the computer on , and select "Start" - "Connect" -
"Connecting to a Wireless Network" in that order.
3
When the window shown at left below is displayed, click the "Advanced"
button. When the window shown at right below is displayed, click the
"Properties" button.
27