Epson EasyMP EMP-745 Guide De Mise En Route page 30

6
Click the "Add" button in the wireless network connection properties
window.
7
Check that WEP is disabled in the wireless network properties window,
and then click the "OK" button.
If using Windows 98/ME, set the name in the "Network name (SSID)" box to
the same term (character string) as the ESSID of the connected projector (the
default setting is "EPSON").
When using Windows XP or 2000, the automatic ESSID Search can be used to
make the connection without setting the ESSID.
Tip :
Automatic ESSID Search
The automatic ESSID search function can be used with the following computers.
• Operating system*: Windows 2000/XP
• When using a NDIS 5.1 compatible wireless LAN driver
If the ESSIDs of the computer and the projector are not the same, you cannot use easy
connect mode to connect to a wireless LAN. However, it is difficult and complicated to
change the ESSID. Because of this, the Windows edition of EMP NS Connection includes
an automatic ESSID search function which uses the ESSID that has been set for the
Check that this is unselected.
29