Epson Dreamio EMP-TW10 Guide De L'utilisateur page 17

fInfo menu
Sub menu
Lamp Hours
Source
Input Signal
(Input A/Input B only)
Video Signal
(Video/S-Video only)
Resolution
(Input A/Input B only)
Refresh Rateg
(Input A/Input B only)
Sync Info
(Input A/Input B only)
fReset menu
Sub menu
Lamp-Hours Resets the lamp operating time. When this command is selected, the cumulative lamp operating
Reset time is reset to the default value.
Memory Reset Resets all settings stored in Memory.
All Reset Resets all items in the configuration menus to their default settings.
• Press the [e] button and select "Yes" on the confirmation screen which is displayed.
• Select "Reset" in an individual menu to reset only the settings for the items in that sub menu.
• "Memory", "Child Lock", "Input A", "Language" and "Lamp Hours" settings will not be reset.
Video/S-Video
Displays the cumulative lamp operating time. From 0 to 10 hours, 0H is displayed. After
10 hours, the usage time is displayed in hourly increments.
• When the accumulated usage time of the lamp reaches the appropriate time (*), a
warning will be displayed in red.
* If Theatre Black has been used continuously: About 2900 hours
If other modes have been used continuously: About 1900 hours
Displays the input source being projected.
Displays the input signal settings.
Displays the Video signal format.
Displays the input resolution.
(Does not appear when the input source is composite video or S-Video.)
Displays the refresh rate
(Does not appear when the input source is composite video or S-Video.)
Displays picture signal information.
In the event that you are having problems with your projector and need to contact an
EPSON dealer, please quote the information displayed on this screen.
Input A/Input B
When component video is being input into the Input A port,
the Refresh Rate and Sync Info will not be displayed.
Function
Function
Configuration Menus
15
Function list-