Optional Accessories - Epson Dreamio EMP-TW10 Guide De L'utilisateur

Optional Accessories

The following optional accessories are available for purchase if required. This list of optional accessories
is current as of August 2003. Details of accessories are subject to change without notice.
Part number
ELPLP25H Spare lamp
ELPAF04 Air filter
ELPST12 Remote controller
ELPSC06 50" Portable screen
ELPSC07 60" screen
ELPSC11 60" wall hanging screen
ELPSC08 80" screen
ELPSC10 100" screen
ELPKC02 VGA-HD15 PC cable (1.8m/6ft.)
(for mini D-Sub 15pin/mini D-Sub 15pin)
ELPKC09 VGA-HD15 PC cable (3m/9.8ft.)
(for mini D-Sub 15pin/mini D-Sub 15pin)
ELPKC10 VGA-HD15 PC cable (20m/65.6ft.)
(for mini D-Sub 15pin/mini D-Sub 15pin)
ELPKC29 RGB SCART adapter (0.3m/0.98ft.)
(for RCA × 4/SCART )
ELPAP01 Mac adapter set
ELPMB11 Ceiling mount*
ELPFC03 Ceiling plate*
ELPFP04 Pipe 370 (370mm silver)*
ELPFP05 Pipe 570 (570mm silver)*
ELPFP06 Pipe 770 (770mm silver)*
ELPKS51 Soft carring case
* A special method of installation is required in order to suspend the projector from the ceiling. Please
contact your dealer if you require this installation method.
28
-Optional Accessories
Part name Use
Use as a replacement for spent lamps.
Use as a replacement for spent air filters.
Identical to the remote control provided with
the projector.
A compact screen which can be carried easily.
(4:3 aspect ratio)
A portable roll type screen. (4:3 aspect ratio)
Use to connect the projector to a computer.
Use when connecting to video equipment by a
SCART cable.
Used to convert a Macintosh D-sub 15pin plug
into a mini D-sub 15 pin plug.
Use when installing the projector to a ceiling.
Use when installing the projector to a high
ceiling or a ceiling with veneer panels.
Use this case if you need to carry the projector
by hand.