Haussmann N1F-GT-300/4.0-B Manuel De L'utilisateur page 21

Fig.I-3
Fig.I-4
Fig.I-5
Fig.I-6
Fig.I-7
Fig.I-8
OPERATING INSTRUCTIONS
SECOND How to wind the string.
1) Hook the string in the groove as shown in Fig.I-3.
2) Wind the string as shown in Fig.I-4 and hook the two ends in the side grooves.
3) Firmly place the cover on the spool and pull them approx.9 cm out of the
spool. Fig.I-5
4) Along the groove slide the string into the hole in the string cover. Fig.I-6
5) Prepare to assemble the spool into the trimmer.
Third How to assemble the spool
1) Insert the spring into the shroud and thread the string into the hole
as shown in Fig.I-7
2) Place the spool cover (3) on the spring and press it firmly down until the
locking devices (4) of the spool cover (3) securely click into place.Fig.I-8
21