Haussmann N1F-GT-300/4.0-B Manuel De L'utilisateur page 20

OPERATING INSTRUCTIONS
Adjusting the telescopic tube :
1. Slacken the coupling nut
2. Pull the telescopic tube to the desired length
3. Retighten the coupling nut again
Adjusting the angle of cutting head.
1. Press locking lever (8)down and hold
2. Turn the operation handle to the desired position
3. Release locking lever (8)again
Warning! Never use steel, wire, rope, string, or other materials as cutting line,
which can break off and become a dangerous projectile.
APPLICATION
The grass trimmer is intended for the cutting of grass and weeds under bushes,
as well as on slopes and edges that cannot be reached with the lawn mover.
The trimmer must be used outdoors only, at an ambient temperature between
0ºC and 45ºC.
Warning! Remove stones, loose pieces of wood and other objects from the
cutting area. The blade continues to rotate for a few seconds after the trimmer
is switched off. Allow the motor/blade to stop rotating before switching on again.
Do not rapidly switch off and on.
SWITCH ON/OFF
To switch the grass trimmer ON, push and hold the safety button, squeeze the
on/off switch, to switch the grass trimmer off, release the on/off switch.
Replacing the spool kits. (Pic. I)
FIRST
How to disassemble the spool.
1) Disconnect the mains plug.
2) Press together both locking devices (4) at the spool cover (3) and remove
the cover. (Fig.I-1)
3) Remove the spool (2) from the spool cover. (Fig.I-2)
4) Remove the spring.
5) Clean dirt and grass residues.
20
G
H
8
I
Fig.I-1
Fig.I-2