Cautions And Warnings - Health O Meter 499KL Notice D'utilisation

CAUTIONS AND WARNINGS

INTENDED USE
®
This Health o meter Professional scale is intended to be used in a professional medical environment
by trained medical staff. This product was designed to weigh patients who are safely positioned and
standing on the platform. Do not modify the product or use it for anything other than its intended
purpose.
To prevent patient/caregiver injury or damage to your scale, please follow the
instructions in this user manual very carefully.
•
Do not exceed the weight capacity specified for this scale.
•
For accurate weighing, this scale must be placed on a flat, stable surface.
•
For accurate weighing, verify before each use the proper operation according to the
procedure described in this manual.
•
Do not use in the presence of flammable or explosive materials.
•
If the scale becomes damaged, it should not be operated until properly serviced.
•
Do not transport the scale with a patient or object on the scale.
•
Do not wheel or pull the scale down stairs. Doing so may damage internal parts.
•
Ensure that the AC adapter and scale do not come in contact with liquids, excessive
temperature, or excessive humidity.
•
Exercise caution when assembling the scale column so as to not pinch the load cell
connector cable.
Patient/caregiver safety
•
This scale is designed for static weighing of patients only. No scale should be used for
patient transfer.
•
Patient should wear socks or other form of lightweight foot covering during weighing
event.
•
To prevent patient injury, the patient must be attended throughout the entire weighing
event. Caregivers should ensure that the patient is stable and provide support as
needed when getting onto and off of the scale.
When operating the scale with the AC adapter:
•
Operate this scale exclusively with the AC adapter provided by Health o meter
Professional. Use of an unspecified adapter will void the warranty, and can pose a
serious safety hazard.
•
For use with AC adapter model ADPT31 (USA and Canada) or ADPT30WA
(International, plug kit)
•
Prior to using this scale, inspect the AC adapter cord for cracking / fraying, or for
broken / bent plug prongs.
•
Prior to using this scale, ensure that the AC adapter is plugged into an outlet with the
rated voltage appropriate for operation.
•
Ensure that the AC outlet is wired to a circuit breaker or other protected power source.
•
Unplug the AC adapter, and carefully store both the adapter and adapter cord before
moving the scale.
•
Operating this scale at voltages and frequencies other than specified can damage the
equipment and will void the warranty.
When operating the scale with batteries:
•
If the display shows "LO", replace the batteries or switch to the AC adapter as soon as
possible.
•
When replacing / inserting batteries, be sure to use all new batteries.
In no event whatsoever shall Pelstar, LLC be liable for damages or injuries arising from or
connected with the assembly, use, or misuse of its products.
3