For Your Safety - Weller WX 1 Mode D'emploi

For your safety

Thank you for the confidence you have shown in buying this device.
The device has been manufactured in accordance with the most rigorous quality standards which ensure that
it operates perfectly.
These instructions contain important information which will help you to start up, operate and service the device
safely and correctly as well as to eliminate simple faults and malfunctions yourselves.
Read these instructions and the accompanying safety information carefully before starting up the
device and starting work with the device.
Keep these instructions in a place that is accessible to all users.
Warning!
Electric shock and risk of burns
Connecting the control unit incorrectly poses a risk of injury due to electric shock
and can damage the device. Risk of burns from the soldering tool while the
control unit is operating.
„
„
The device has been manufactured in accordance with state-of-the-art technology and acknowledged regula-
tions concerning safety. There is nevertheless the risk of personal injury and damage to property if you fail to
observe the safety information set out in the accompanying booklet and the warnings given in these instruc-
tions. Always pass on the device to third parties together with these operating instructions.
This appliance is not intended for use by persons (including children) with limited physical, sensory or
mental capabilities or insufficient experience and/or knowledge unless they are supervised by a person
who is responsible for their safety or have been instructed by them in the safe use of the appliance.
Children should be supervised in order to ensure that they do not play with the tool.
Specified Conditions Of Use
Use the soldering station/ desoldering station exclusively for the purpose indicated in the operating inst-
ructions of soldering and unsoldering/desoldering under the conditions specified herein.
Intended use of the soldering station/ desoldering station also includes the requirement that you
adhere to these instructions,
„
observe all other accompanying documents,
„
comply with national accident prevention guidelines applicable at the place of use.
„
The manufacturer will not be liable for unauthorised modifications to the device.
Applied directives
The Weller soldering station/ desoldering station conforms to the specifications of the EC Declaration of
Conformity as defined by Directives 2004/108/EC, 2006/95/EC and 2011/65/EU (RoHS).
Disposal
Do not dispose of electric tools together with household waste material! In observance
of European Directive 2002/96/EC on waste electrical and electronic equipment and its
implementation in accordance with national law, electric tools that have reached the end
of their life must be collected separately and returned to an environmentally compatible
recycling facility.
28
PK Elektronik Vertriebs GmbH, E-Mail: info@pkelektronik.com, Internet: www.pkelektronik.com
Read the enclosed instructions, the safety instructions included in these
operating instructions as well as the instructions for your control unit all the way
through and observe the specified precautionary measures before putting the
control unit into operation.
Always place the soldering tool in the safety holder when not in use.