Weller WX 1 Mode D'emploi page 34

Parameter menu
Offset (temperature offset)
Control response
Process window
Language
Temperature version °C/°F (temperature units)
32
PK Elektronik Vertriebs GmbH, E-Mail: info@pkelektronik.com, Internet: www.pkelektronik.com
The actual soldering-tip temperature can be adapted by entering a
temperature offset around ± 40 °C (± 72 °F).
The function determines the heating characteristics of the soldering
tool to achieve the set tool temperature.
Option Description
standard adapted (medium) heating (factory setting)
soft slow heating
aggres- rapid heating
sive
Der iThe temperature range set in the process window determines
the signal response of the floating switching output.
Note
On tools with an LED ring light (e.g. WXDP 120), the process
window defines the illumination characteristics of the LED ring light.
If the LED is continuously illuminated, this means that the preselec-
ted temperature has been reached or that the temperature is within
the predetermined process window.
A flashing LED indicates that the system is heated or that the
temperature is outside the process window.
CHN
中文
DAN Dansk
ENG English
ESP Español
FIN Suomi
Option Description
° C Celsius
° F Fahrenheit
Open Menu Parameter menu 2
Open Menu Parameter menu 2
Open Menu Parameter menu 2
Open Menu Station parameters 1
FRA Français
GER Deutsch
HUN Magyar
ITA Italiano
POR Português
Open Menu Station parameters 1
RUS Pусский
SWE Svenska
TUR Türkçe