Inserting/Removing Sd/Mmc Card; Switching To Sd/Mmc Mode; Confi Guring The Display - Blaupunkt Melbourne SD27 Notice D'utilisation Et De Montage

SD/MMC card mode
You can name each directory using a PC. The
name of the directory is then shown on the
display of the device.
If you like your fi les to be in the specifi c or-
der, save the fi les on the card in the desired
sequence in which you want to play them
later.
D01
D02
D03
T001
T002
T003
T004
T005
T001
T002
T003
T004
T005
T006
A Directories
B Tracks · Files
Inserting/removing SD/MMC
card
u
Insert the SD/MMC card with its la-
belled side to the left and its contacts
fi rst into the card slot : until it clicks
into place.
You can now select the SD/MMC card as au-
dio source with the SRC button ?.
16
A
D04
T001
T002
T003
T004
T005
T006
B
T007
T008
T009
T010
T011
To remove the SD/MMC card,
u
push on the SD/MMC card until it disen-
gages.
u
Pull the SD/MMC card out of the card
slot :.

Switching to SD/MMC mode

Press the SRC button ? repeatedly until
u
the display shows "SD Card".
The playback starts.
Confi guring the display
The following settings require that an SD card
with MP3 or WMA fi les is in the device.
Confi guring the default display
You can display various types of information
on the current track:
• File name or track name
• Artist
• Album name
Play time (PLAY)
•
•
Time (CLK)
Note:
The ID3 text changes to scrolling text
with more than 9 characters. After one
pass, the fi rst 9 characters are perma-
nently shown on the display.
To switch between the different display op-
tions,
u
press the DIS
button 9.