Selecting A Directory; Selecting Tracks; Fast Seek Tuning (Audible); Repeating Individual Tracks Or Whole Directories (Repeat) - Blaupunkt Melbourne SD27 Notice D'utilisation Et De Montage

Selecting a directory

To move up or down to another directory,
u
press the or
several times.

Selecting tracks

To move up or down to another track in the
current directory,
u
press the or
several times.
If you press the
current track will be played again from the
beginning.

Fast seek tuning (audible)

To fast search backwards or forwards,
u
Press and hold down the
5 for longer than two seconds.
Seek tuning continues as long as you hold
the button pressed.
Repeating individual tracks or
whole directories (REPEAT)
You can repeatedly play the current track or
all tracks in the current directory.
u Press the 4 RPT = button repeatedly
until the desired function appears on the
display:
•
"RPT TRACK" (current track)
•
"RPT DIR"
(all tracks in the current directory)
•
"RPT OFF" (end repeat)
5 button once or
5 button once or
button 5 once, the
or button
If the repeat function is active, the display
shows RPT.

Random track play (MIX)

You can play either all tracks in the current
directory or all tracks on the SD/MMC card
in random order.
Press the 5 MIX = button repeatedly
u
until the desired function appears on the
display:
•
"MIX ALL"
(all tracks on the SD/MMC card)
•
"MIX DIR"
(all tracks in the current directory)
• "MIX OFF" (end playback in random or-
der)
If the random track play (MIX) is active, the
display shows MIX.

Scanning tracks (SCAN)

You can scan all the tracks on the SD/MMC
card.
Press the M/OK button > for longer
u
than two seconds.
The display changes between "SCAN" and
the fi le name. The tracks of the SD/MMC are
scanned in ascending order.
Note:
You can set the scanning time. For
further information on setting the
scanning time, please read the section
entitled "Setting the scanning time" in
the "Radio mode" chapter.
SD/MMC card mode
17