Storing Stations; Storing Stations Automatically (Travelstore); Listening To Stored Stations; Scanning Receivable Stations (Scan) - Blaupunkt Melbourne SD27 Notice D'utilisation Et De Montage

Radio mode

Storing stations

Storing stations manually
u
Select the desired memory bank FM1,
FM2, FMT, AM or AMT.
u
Tune into the desired station.
u
Press and hold down one of the station
buttons 1 - 5 = for longer than two
seconds to assign the station to that
button.
Storing stations automatically
(Travelstore)
You can automatically store the fi ve strongest
stations in the region. The stations are stored
in the FMT or AMT memory bank.
Note:
Any stations that were previously
stored in this memory bank are deleted
in the process.
u
Select the desired FM or AM waveband.
u
Press and hold down the BND/TS button
4 for longer than two seconds.
The storing procedure begins. The display
shows "FM TSTORE" or "AM TSTORE". After
the process has completed, the radio will
play the station that is stored in memory lo-
cation 1 of the FMT or AMT memory bank.

Listening to stored stations

u
Select the memory bank or waveband.
u Press the station button 1 - 5 = of the
desired station.
14
Scanning receivable stations
(SCAN)
You can use the scan function to play all the
receivable stations briefl y. You can set the
scanning time from 5 to 30 seconds in the
menu (in increments of 5 seconds).
Starting SCAN
u
Press and hold down the M/OK button
> for longer than two seconds.
Scanning begins. "SCAN" and frequency are
intermittently shown on the display.
Cancelling the SCAN and continuing to
listen to a station
u Press the M/OK button >.
Scanning stops and the radio continues play-
ing the station that it tuned into last.

Setting the scanning time

Press the M/OK button >.
u
The display shows "MENU".
u
Press the or
edly until "SCAN TIME" appears on the
display.
u Press the M/OK button > to display the
submenu.
"SCAN" and the currently set value are dis-
played.
u
Set the desired scan time using the
button 5.
When you have fi nished making your chang-
es,
u press the M/OK button >.
button 5 repeat-
or