Random Track Play (Mix); Scanning All Tracks On All Cds (Scan); Interrupting Playback (Pause); Clock - Time - Blaupunkt Melbourne SD27 Notice D'utilisation Et De Montage

u Press the 4 RPT = button repeatedly
until the desired function appears on the
display:
•
"RPT TRACK" (current track)
•
"RPT DISC"
(all tracks on the current CD)
•
"RPT OFF" (end repeat)
If the repeat function is active, the display
shows RPT.

Random track play (MIX)

You can play either all tracks on the current
CD or all CDs in the magazine in random
order.
u Press the 5 MIX = button repeatedly
until the desired function appears on the
display:
•
"MIX CD" (all tracks on the current CD)
•
"MIX ALL" (all CDs in the magazine)
•
"MIX OFF" (end random order)
If the random track play (MIX) is active, the
display shows MIX.
Scanning all tracks on all CDs
(SCAN)
To scan (briefl y play) all the tracks on all the
inserted CDs in ascending order,
u press the M/OK button > for longer
than two seconds.
The display changes between "SCAN" and
the track number. All CDs in the magazine
are scanned in ascending order.
Note:
You can set the scanning time. For
further information, please read the
section entitled "Setting the scanning
time" in the "Radio mode" chapter.
CD-changer mode | Clock - Time
Cancelling Scan and continuing
listening to a track
u Briefl y press the M/OK button >.
The currently scanned track will then con-
tinue to be played normally.

Interrupting playback (PAUSE)

u button =.
Press the 3
"PAUSE" appears on the display.
Cancelling pause
u button =.
Press the 3
Playback is continued.

Clock - Time

Displaying the time

You can display the time in the tuner, SD and
CD changer mode.
u button 9 until the time
Press the DIS
appears on the display.

Setting the time

To set the time,
u press the M/OK button >.
The display shows "MENU".
u
Press the or
edly until "CLOCK SET" appears on the
display.
button 5 repeat-
19