ZUMEX Versatile Pro Manuel De L'utilisateur page 19

Detecting Faults
Fault Possible cause
The machine doesn't work Machine not plugged in.
No power is reaching the plug.
Cover not fitted properly.
Juice container not fitted
properly.
Blocked pressing units.
Safety sensors malfunctioning.
Faulty ON/OFF button.
Faulty circuit.
The machine blocks Insufficient voltage.
frequently during juicing
Faulty circuit.
The pressing units are not Fault in an axle.
synchronized
Peel ejector breaks Peel ejector incorrectly fitted.
You can hear the motor
Internal fault.
running but the pressing
units are not turning
Correction
Plug it in.
Check the socket.
Make sure it has been fit
properly.
Make sure it has been fit
properly.
Turn off the machine at the
mains and unblock the pressing
units.
Contact your technical service.
Contact your technical service.
Contact your technical service.
Check that the voltage matches
that indicated in the manual.
Contact your technical service.
Contact your technical service.
Place it in its correct position
inserting it totally until
observing it has madecontact
(Fig. 8)
Contact your technical service.
Fault Possible cause
The faucet gets blocked The juice has seeds or too much
pulp.
The machine stops every Insufficient ventilation.
now and again
Overload.
Screen does not display Alteration to mains systems.
information
The machine is in self- Faucet not fitted or fitted
service mode and won't incorrectly.
stop operating
Faucet well fitted: possible
internal fault.
Faucet block activated.
WARNING:
Any action to unblock the machine must be carried out
by disconnecting it from the mains. If, after making the checks stated here, the
machine does not work, call the technical service.
EN
Correction
Disassemble and clean the
faucet according Fig. 11A.
Check that the appliance's
ventilation grilles are not
blocked.
Contact your technical service.
Turn off the machine and turn it
back on again.
Fit the faucet in the manner
indicated in Fig. 11A
Contact your technical service.
Put the block in horizontal
position by pressing the faucet
downwards.
35