Accessories - ZUMEX Versatile Pro Manuel De L'utilisateur

2
Fit the Elevation Kit legs.
There are four holes on the base of the machine, where the legs go. The
legs are supplied with some screw-in studs that are already fitted into the
ends of the legs. We must fully insert them into the holes (A) on the base
and then screw the legs in as far as they will go. Once this operation has
been carried out with all four legs, these can be mounted and removed
when required without the screw-in studs coming out of their housing.
A
3
Put the machine back into its working position.
Carefully stand the machine back up again leaving it in its working
position.

Accessories

There is a wide range of accessories available for you to make the most of your
machine:
1Step Extraction Kit
With this accessory you will be able to dismantle the machine in just 10
seconds and clean it under the tap or in the dishwasher.
* Including juice extraction system.
Kit S / 1Step Extraction Kit S
To juice fruit that has a diameter of 45 mm to 67 mm.
Countertop Kit
Integrates waste management keeping things practical and clean.
Elevation kit
This Zumex machine has an Elevation Kit to make it easier to clean the
surface where it is located.
Bottle set
For self-service restaurants - bottles, glasses or jugs of juice can be
distributed easily. Includes three trays (4 heights). It is integral to the
podium and the whole set can be transported with ease.
Zumex Pack
Fresh drinks can be packaged for commercialization, especially freshly
squeezed orange juice. There are 6 formats (1.5 l, 1 l, 75 cl, 50 cl, 33cl and 25
cl) and custom-made stickers.
Check www.zumex.com for more information on accessories for your
machine.
EN
33