ZUMEX Versatile Pro Manuel De L'utilisateur page 14

Total counter: This shows you all the oranges consumed throughout the life
of the juicer, this counter cannot be deleted.
On the TECHNICAL SERVICE menu select COUNTERS > TOTAL COUNTER
and press ON to confirm your selection. You can view the number of oran-
ges on the screen. Move up to the upper menu by pressing OFF.
Discounter: This allows you to programme a given no. of oranges and
gradually consume oranges from this total. On the TECHNICAL SERVICE
menu select COUNTERS > DISCOUNTER and press ON to confirm your
selection. Enter your PIN (Remember: Select each digit using the cursors
, press OFF to move from digit to digit and ON to confirm the
password) and you will enter the discounter menu. Programme each digit
of the discounter using the cursors
to move on to the next one and repeat this action for each digit; on the
last digit press ON and the selection will be memorised automatically.
Then select whether you want the discounter to be visible or not on the
main menu (visible/concealed option). Return to the menu, pressing OFF
repeatedly.
Once the discounter is at zero, the juicer will stop until a new sum
of oranges is loaded or a change is made to the counter function,
entering the "MAIN COUNTER" menu and confirming by pressing ON.
When the visible discounter has been programmed, a 'D' will appear
on the normal operating screen in front of the counter digits. If
the concealed discounter has been programmed, no figure will be
displayed.
and after each digit press OFF
Summary of Zumex Essential Pro and Versatile Pro Operating Modes
Working mode
Configuration Professional
Technical Service
Professional
Professional Fruits
03
Working mode Lighting Lighting
Configuration Language
Technical Service Offset
Language
Lighting
English
Language
Offset
1/23
Pin ? Offset
Lighting
Language
0000
Offset
Serial number
Working mode Serial number
Voltage
Configuration
Calibration
Technical Service
0000
Pin
Counters
Voltage
Serial number
Voltage
Calibration 231
Pin
Counters
Serial number Calibration value Calibration value
Voltage Offset value
Calibration Calibration
Pin
Counters
Offset value
Calibration value
Offset value
Calibration
Calibration value
Offset value
Calibration
30
97
30
Calibration Calibration Calibration
Calibration?
0000 85
EN
25