Precautions For Use - Chauvin Arnoux E6N Notice De Fonctionnement

English
Meaning of the symbol
CAUTION! Consult the operating manual before using the instrument.
In this operating manual, the instructions preceded by this symbol may cause personal
injury or damage the device and installations if they are not scrupulously abided by or
carried out.
Thank you for purchasing a AC/DC current clamp E6N.
To obtain the best service from the instrument, please:
- read the instruction manual carefully, and
- respect all necessary precautions that are required in the use of the instrument.
I Do not use the clamp on conductors in which the common mode voltage in relation to
the earth is more than 600 V rms.
I Do not clamp a conductor unless it is connected to a measuring instrument.
I Keep the cable or the busbar centred in the clamp which should be perpendicular
to the conductor.
I Avoid proximity to other conductors which may create fields of interference.
I The clamp must be totally disconnected in the OFF position when the battery is
changed.
I In order for a measurement chain to conform to a standard, it is necessary that each
item of the chain also conforms to this standard. For your safety, ensure that the
instruments used with your clamp are also in accordance with IEC 1010 and its
conditions of application. In particular, check that the terminals of the instruments
used are protected by an earth link or by adequate insulation.
I Keep the jaw faces clean. (See Maintenance chapter).
Our guarantee is applicable for twelve months after the date on which the equipment is
made available (extract from our General Conditions of Sale, available on request).

PRECAUTIONS FOR USE

WARRANTY
13