Important - Beurer MC3800 Mode D'emploi

5. Operation
Warning!
• Before using the device for the first time, read the safety notes in the Safety section.
Safety, pages 13 to 14
w
Danger of tipping!
• Sit down carefully on the chair and only when it is in the upright position. Never sit down on the chair when it is
in the flat position.
Caution!
• If you experience irritations of any kind, stop treatment immediately.

Important!

• Never remove the back cushion during the massage.
Before switching on
• Wear comfortable clothes during the massage.
• Remove all objects from your trouser pockets (e.g. keys, pocket knife, mobile phone).
• Assume a comfortable, relaxed position.
• Always sit in the middle of the seat so that your spine is positioned precisely between the massage rollers.
• The massage should feel pleasant and relaxing at all times. If the massage is painful or uncomfortable, stop the
massage or change your sitting position.
• If the device has not been used for a longer period of time, check that the device is functioning correctly before
use.
Starting the massage
Press the on/off button on the hand switch.
After being switched on, the back rest reclines and the leg rest is raised. At the same time, the entire back is
scanned to determine the size of the user. The relax massage programme is activated after the user's back has
been scanned.
• Press the vibration intensity button in order to adjust or switch off the intensity of the vibration massage in the
seat or foot area.
• The vibration massage can be switched on or off separately for the seat and feet.
Flat position/upright position
Switching off the massage chair
After a massage programme is finished, the chair automatically switches off. The current position of the massage
chair is maintained. By pressing the On/Off button again, the relax massage programme is restarted. The massa-
ge chair returns to the start position if the On/Off button is pressed twice.
Caution!
Do not use the device for longer than 15 minutes at a time otherwise the device could overheat. Allow the device
to cool for at least 30 minutes before using it again.
During the massage, you can switch off the device at any time using the on/off button.
• Switch off the massage chair using the main switch beneath the back rest.
• Pull the mains plug out of the socket
• Put the massage chair in the flat position.
18