Island Installation - Electrolux ECFD3068AS Instructions D'installation

30" DUAL FUEL RANGE INSTALLATION INSTRUCTIONS
3. Fasten the front skirting to the appliance using
the screws that were previously removed.
4. After the front skirting has been installed, the side
skirting can be fastened correctly to the appli-
ance. Use a screwdriver to remove the side
screws.
5. Insert the tabs on the side skirting into the slots
on the back of the front skirting.
6. Line up the hole on the side skirting with the rear
hole on the base of the appliance.
7. Fasten the side skirting to the appliance using the
screw that was previously removed.
8. Repeat the procedure for the other side skirting
section.

Island installation

If the appliance is installed as an island:
1. Unscrew the screws indicated.
2. Remove the spacers (A).
3. Insert the screws that were previously removed
into their seats.
Keep a minimum clearance of 5 7/8" (150 mm)
between the appliance and the other furnishings or
decorative elements according to the diagram
below.
6