Island Installation; Unpacking, Moving And Positioning The Range - Electrolux ECFI3668AS Instructions D'installation

36" ELECTRIC RANGE INSTALLATION INSTRUCTIONS
5. Insert the tabs on the side skirting into the slots
on the back of the front skirting.
6. Line up the hole on the side skirting with the rear
hole on the base of the appliance.
7. Fasten the side skirting to the appliance using the
screw that was previously removed.
8. Repeat the procedure for the other side skirting
section.

Island installation

If the appliance is installed as an island:
1. Unscrew the screws indicated.
2. Remove the spacers (C).
3. Insert the screws that were previously removed
into their seats.
Keep a minimum clearance of 5 7/8" (150 mm)
between the appliance and the other furnishings or
decorative elements according to the diagram
below.
The side cabinet depth (clearance A) must match
the front edge of the range side panel:
Unpacking, moving and
positioning the range
CAUTION
This unit is designed as a cooking
appliance. For safety reasons, never use it for
warming the room or as a space heater.
• It is recommended that the front kick panel, the
backguard and oven racks be removed to facili-
tate handling. This will reduce the weight for mov-
ing.
• When positioning the appliance during installa-
tion, do not use the door handle to lift or move the
appliance.
6