Electrical Connection - Electrolux ECFI3668AS Instructions D'installation

Masquer les pouces

Table des Matières

Les langues disponibles

36" ELECTRIC RANGE INSTALLATION INSTRUCTIONS

• The appliance can be moved with a hand dolly or

with a clamp lift truck (not with a fork lift truck) only

if it is still packaged.

• Wear gloves to avoid cutting fingers on sharp

edges during installation.

• Remove the outer carton and packing material

from the shipping base.

• Before moving range ensure legs are installed

completely.

• Due to its weight, after removing the packing

material, move it with the help of a second person.

• The floor under the legs should be protected

(wood, strips, carpet, paneling, etc.) before push-

ing the unit into position.

• The anti-tip device must be installed, and the elec-

trical connection should be made before the range

is placed in its final position.

• Legs should be installed near to where the appli-

ance will be used as they are not secure for long

transit. Keep the unit raised so that the legs can

be screwed into their couplings, then lower the

range gently to prevent the legs and mounting

hardware from being subject to any undue strain.

NOTE: First insert the front feet and then the rear

ones.

The following is the correct order of installation and

positioning:

1. Install and adjust the legs.

2. Install the front/side skirting.

3. Assemble and fix the anti-tip bracket to the floor

or wall.

4. Connect the plug to the grounded outlet.

5. Move the range to its final position.

The adjustment range of the screw is 1.37 inches

(35 mm).

The appliance must sit level on the floor to ensure

stability:

• Screw or unscrew the bottom part of the foot until

the appliance is stable and level on the floor.

NOTE: this appliance must only use the specific

leveling legs provided by the manufacturer.