Installing The Backguard; Installing The Front/Side Skirting - Electrolux ECFI3668AS Instructions D'installation

36" ELECTRIC RANGE INSTALLATION INSTRUCTIONS

Installing the backguard

The backguard provided is an integral part of the
appliance; it must always be positioned and secured
correctly on the cooktop.
1. Position the backguard on the top.
2. Make sure that you align the pins (A) of the back-
guard with the holes (B) on the cooktop.
3. Secure the backguard to the top by the tightening
the screws.

Installing the front/side skirting

The front skirting must always be correctly posi-
tioned and secured to the appliance.
1. Use a screwdriver to remove the front screws.
2. Position the front skirting at the bottom of the
appliance and line up the holes on the side of the
skirting with the holes on the base of the appli-
ance.
3. Fasten the front skirting to the appliance using
the screws that were previously removed.
4. After the front skirting has been installed, the side
skirting can be fastened correctly to the appli-
ance. Use a screwdriver to remove the side
screws.
5