Electrolux ECFD3068AS Instructions D'installation page 18

30" DUAL FUEL RANGE INSTALLATION INSTRUCTIONS
Installing the anti-tip bracket:
1. Ensure that the electrical connection is in the cor-
rect position.
2. Assemble the bracket.
3. Align the base of the hook of the bracket with the
base on the slot of the rear wall fastening
bracket. Align the base of the fastening bracket
with the floor and tighten the screws to fix the
measurements.
4. For wall mounting, go to steps 5, 6, 9 and 10. For
floor mounting, to steps 7, 8, 9 and 10.
NOTE: The wall attachment is recommended if the
appliance is placed against a wall. Floor attach-
ment is recommended in case of island installa-
tion.
5. Use the specified distance from the side of the
appliance to the bracket holes.
6. Move the bracket to the wall and fix with the two
washers and screws. A qualified technician must
verify the suitability of the materials in accor-
dance with the type and condition of the wall.
18