Beko HCA62641BH Manuel D'utilisation page 15

5 Installation Of Appliance
(Figure 13)
1- Flap Pin Socket
2- Flap Pin
Attach the flue flaps to the plastic flue adapter
in the package content as follows.
Insert the plastic pin (Figure 13 / area no. 2)
on the pin socket on the motor exhaust (Fig-
ure 13 / area no.1
). Then bend the flap lightly to insert the other
pin on the flap and insert the other pin to its
socket (Figure 13).
(Figure 14)
1- Air Baffle
2- Plastic Flue
Attach the plastic flue adapter, which is in-
cluded in the package, in the direction of the
air baffle. Lock the flue adapter by turning it in
the direction of the arrow (Figure 14).
Cooker Hood / User Manual
(Figure 15)
Assemble the air baffle group with 3.9 x 22
screws from point C, D, E, F that you have
already prepared (Figure 15).
1
2
(Figure 16)
1- Aluminium Air Outlet Pipe
Make the air outlet pipe assembly (Figure 16).
C
Install the flue plates of the hood (Page 14 / Figure
13)
Since twists and bends in the
aluminium pipe will lead to re-
duction in the air suction power,
avoid using twists and bends as
much as possible.
15 / EN