Operation Of The Appliance; Automatic Stop - Beko HCA62641BH Manuel D'utilisation

3

Operation of the Appliance

3.1 Controlling the Appliance
KEY
(A) : Light On / Off
(B) : 1. Stage Button
(C) : 2. Stage Button
(D) : 3. Stage Button
3.2 Efficient Use in terms of
Energy Saving
When using your appliance, adjust the
•
speed settings according to vapour and
odour intensity, in order to save energy.
Use low speeds (1-2) under normal condi-
•
tions, and high speed (3) for intense odour
and vapour.
* The lamps on the hood are placed for illu-
•
minating the cooking area.
Using them for environmental lighting shall
cause unnecessary energy expenditure and
insufficient lighting.
3.3 Operation of the Hood
Your appliance contains a motor that has
•
various speeds.
For better performance, we recommend
•
using low speeds under normal conditions
and high speeds in cases of strong odours
and intense vapour.
8 / EN
FUNCTION
You may illuminate the cooking area by pressing
this button. Re-press the button to turn off
the lamp.
Operates the appliance on 1st speed. When you
press this button again to turn off the appliance,
the screen speed stage turns off.
Operates the appliance on 2nd speed. When you
press this button again to turn off the appliance,
the screen speed stage turns off.
Operates the appliance on 3rd speed. When you
press this button again to turn off the appliance,
the screen speed stage turns off.
You can start your appliance by pressing on
•
the desired speed setting button. (B,C,D)
You can illuminate the cooking area by
•
pressing the lamp. (A)

3.4 Automatic Stop

Your appliance has Automatic Stop feature,
enabling it to ventilate for a bit more and re-
move the unwanted odours and vapour inside
the environment and turn off automatically af-
ter the cooking is done. To enable Automatic
Stop feature, press the any speed stage but-
ton (B, C, D) on the control panel for longer
than 2 seconds; the 15-minute timer function
shall be activated. When the automatic stop
feature is active, pressing the same speed
button shall disable the automatic stop func-
tion and the appliance's motor shall stop. This
feature is disables when you switch between
different speed stages.
If you want the appliance to stop automati-
cally, you need to enable the automatic stop
feature again.
Cooker Hood / User Manual