ADEUNIS Sigfox DELTA P Guide Utilisateur page 41

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Sigfox DELTA P - Guide utilisateur / User guide version V2.0.1
Procedure to follow to program its registers according to the chosen mode.
Periodic
A reading every X
seconds
I divide the X value
by 2 and I indicate it
in the
S321 register
I save each reading
I indicate 1 in my S320
register
I want to maximize
my frame to minimize
the number of
transmissions
I indicate the number
of readings that I want
in my frame in my
register S301 (5 being
the maximum possible
in Sigfox without losing
data)
Which mode do I want my device in?
Periodic
Alarm
What period do I want between each reading?
A reading every X
seconds
I divide the X value
by 2 and I indicate it
in the
S321 register
When do I save the information?
I want to scan regularly
for my alarm but I need
to save the information
every Y time
I indicate the Y value in
my S320 register
When will my frame be sent?
I want to maximize my
frame to minimize the
number of transmissions
I indicate the number
of readings that I want
in my frame in my
register S301 (5 being
the maximum possible
in Sigfox without losing
data)
I set my thresholds S330
to S334
+
Alarm on
exceeding
threshold
A reading every X
seconds
I divide the X value
by 2 and I indicate it
in the
S321 register
In alarm mode I do
not need to save the
information
I do not need to enter
a value in the S320
register
My frame is sent
when my threshold is
exceeded
I indicate 0 in my S301
register to disable the
periodic mode
I set my thresholds
S330 to S334 for
temperature and S340
to S344 for humidity
Page
EN
41
of 50

Publicité

Table des Matières
loading

Table des Matières