Maintenance; Replacing An Oven Light - Bosch 500 Serie Mode D'emploi

Part
Plastic & When cool, clean with soapy water,
Controls rinse and dry.
Printed Areas Do not use abrasive cleansers.
(Words and When cool, clean with soapy water,
Numbers) rinse, dry.

Maintenance

Replacing an Oven Light

9 WARNING
• Make sure the appliance and lights are cool and
power to the appliance has been turned off
before replacing the light bulb(s). Failure to do
so could result in electrical shock or burns.
• The lenses must be in place when using the
appliance.
• The lenses serve to protect the light bulb from
breaking.
• The lenses are made of glass. Handle carefully
to avoid breaking. Broken glass could cause an
injury.
• Light socket is live when door is open.
Bulb specifications:
Oven Width
Description
27 inch 25 Watt,
25WPRE14,
500 HBN Series
European base
Ovens
30 inch 40 watt,
appliance bulb,
500 HBL Series
standard
Ovens
Edison base
Recommendations
Bulb Bulb Image
To change the bulb:
1. Turn off power to the
oven at the main
power supply (fuse or
breaker box).
2. Remove the glass
cover by unscrewing
it. Turn the glass
counterclockwise to
remove it.
3. Remove the bulb. The
bulb unscrews
counterclockwise.
4. Grasp the new bulb
with a clean, dry cloth
to prevent depositing
skin oils on the glass
which could lead to
premature bulb failure.
Replace the bulb by
screwing it in turning
the bulb clockwise.
5. Screw the glass cover
back on.
6. Turn power back on at
the main power supply
(fuse or breaker box).
English 20