GB
3.3
Display message
do
b
t
No dL
No bL
cc
The machine is able to detect different malfunction conditions.
Here is a short description of what to do if the display shows Er ....
Display
Alarm
message
Er
02
No Drain
USE AND MAINTENANCE MANUAL
VIEWING THE NUMBER OF WASHING CYCLES CARRIED OUT
The number of washing cycles performed can be displayed.
Just press push-button L for a few seconds and the display will show
the figure, as indicated in the picture
The display first shows thousands and hundreds, then tens and units.
One of the machine doors is open.
Rinse water temperatures.
Washing water temperature.
Detergent missing.
Rinse aid missing.
Number of washing cycles performed
Check drain tubes and make sure they are not obstructed.
For the machines equipped with "overflow device", make sure it is not in
place.
Should the problem still occur it is likely that the drain electric pump has
failed: contact a service centre.
3.4
Function description
3.5
Detected fault description
Pag. 9
USER MESSAGES
ERROR MESSAGES