Setting The Clock - Sharp R-969 Mode D'emploi

Wawa-R969, R96ST-A.qxd
USING THE STOP KEY

SETTING THE CLOCK

There are two setting modes: 12 hour clock and 24 hour clock.
Step 2
Step 1
x1
Example:
To set the 24 hour clock to 23:35.
1. Choose the 24 hour clock
by pressing the CLOCK
SETTING key twice.
x2
4. Input the minutes (35).
Press the TIME keys.
x3
NOTES:
1. Press the STOP key if you make a mistake during
programming.
2. If the oven is in cooking or timer process and you
wish to know the time of day, press the CLOCK
SETTING key. As long as your finger is pressing
the key, the time of day will be displayed.
3. If the electrical power supply to your microwave
oven is interrupted, plug in the oven again, then
open and close the door. The display will show
"ENERGY SAVE MODE TO GO OUT OF ENERGY
SAVE MODE SET CLOCK". This information will
appear if you have already set the language with
8/31/06 12:13 PM Page 6
Use the STOP key to:
1.
2.
3.
1. To set the 12 hour clock, press the CLOCK SETTING key once as in
Step 1.
2. To set the 24 hour clock, press the CLOCK SETTING key twice as in
Step 2 .
x2
2. Input the hours. Press the TIME
keys until the correct hour is
displayed (23).
5. Press the CLOCK SETTING
key to start the clock.
x5
Erase a mistake during programming.
Stop the oven temporarily during cooking.
Cancel a programme during cooking, press
the STOP key twice.
x2 x3
x1
the LANGUAGE key. If this occurs during cooking,
the programme will be erased. The time of day will
also be erased.
4. When you want to reset the time of day, follow the
above example again.
5. If you do not want to set the clock, press the STOP
key once. will appear on the display. When
the operation of the oven is finished,
reappear on the display instead of the time of day.
6. If you set the clock, energy save mode does
not work.
GB-5
3. Change from hours to minutes
by pressing the CLOCK
SETTING key once.
x1
Check the display.
will