Yamaha Motor YZ250 N/LC 2001 Manuel D'atelier Du Proprietaire page 488

REAR SHOCK ABSORBER
3. Install:
9Rear shock absorber
4. Install:
9Bolt (rear shock absorber-frame) 1
9Nut (rear shock absorber-frame) 2
NOTE:
Apply the molybdenum disulfide grease on the
bolt.
5. Install:
9Plain washer 1
9Bolt (rear shock absorber-relay arm) 2
NOTE:
9 Apply the molybdenum disulfide grease on
the bolt.
9 Insert the bolt from right side.
6. Install:
9Rear frame 1
9Bolt (rear frame) 2
7. Tighten:
9Screw (air cleaner joint) 1
5-64
CHAS
56 Nm (5.6 m•kg, 40 ft•lb)
53 Nm (5.3 m•kg, 38 ft•lb)
29 Nm (2.9 m•kg, 21 ft•lb)