Engine Removal - Yamaha Motor YZ250 N/LC 2001 Manuel D'atelier Du Proprietaire

EC4M0000

ENGINE REMOVAL

34 Nm (3.4 m•kg, 24 ft•lb)
69 Nm (6.9 m•kg, 50 ft•lb)
26 Nm (2.6 m•kg, 19 ft•lb)
69 Nm (6.9 m•kg, 50 ft•lb)
Extent of removal
Preparation for
removal
Order Part name
ENGINE REMOVAL
Hold the machine by placing the
suitable stand under the engine.
Seat and fuel tank
Carburetor and carburetor joint
Exhaust pipe and silencer
Exhaust pipe stay (rear)
Clutch cable
Radiator
Spark plug
Disconnect the CDI magneto lead.
ENGINE REMOVAL
75 Nm (7.5 m•kg, 54 ft•lb)
Q'ty
w
Support the machine securely so there is no dan-
ger of it falling over.
Refer to "SEAT, FUEL TANK AND
SIDE COVERS" section.
Refer to "CARBURETOR AND REED
VALVE" section.

Refer to "EXHAUST PIPE AND


SILENCER" section.
Disconnect at engine side.
Refer to "RADIATOR" section.
4-59
ENG
85 Nm (8.5 m•kg, 61 ft•lb)
8 Nm (0.8 m•kg, 5.8 ft•lb)
Remarks