Table des Matières
Publicité
1 Brake hose
2 Master cylinder
3 "ENGINE STOP" button lead
4 "ENGINE STOP" button
5 Throttle cable
6 Clutch cable
7 Clamp
8 Cable guide
CABLE ROUTING DIAGRAM
A Install the brake hose so that its pipe portion
dirrects as show and lightly touches the projection
on the master cylinder.
B Pass the "ENGINE STOP" button lead in the middle
of the clutch holder.
C Pass the clutch cable in front of the throttle cable.
D Clamp the "ENGINE STOP" button lead to the han-
dlebar to 3 clicks.
E Pass the brake hose in front of the number plate
and through the cable guide.
F Cross the clutch cable and throttle cable over the
number plate mounting boss.
2-16
SPEC
Publicité
Table des Matières
