Table des Matières
Publicité
REAR SHOCK ABSORBER LOW COMPRESSION
b
q
a
a
DAMPING FORCE ADJUSTMENT
b
3-32
EC36c000
REAR SHOCK ABSORBER LOW
COMPRESSION DAMPING FORCE
ADJUSTMENT
1. Adjust:
9Low compression damping force
By turning the adjuster 1.
Stiffer a a
Increase the low compression
damping force. (Turn the ad-
juster 1 1 in.)
Softer b b
Decrease the low compres-
sion damping force. (Turn
the adjuster 1 1 out.)
Extent of adjustment:
Maximum
Fully turned in
position
9STANDARD POSITION:
This is the position which is back by the specif-
ic number of clicks from the fully turned-in posi-
tion. (Which align the punch mark a on the ad-
juster with the punch mark b on the high com-
pression damping adjuster.)
Standard position:
About 8 clicks out
*About 10 clicks out
*For EUROPE
cC
Do not force the adjuster past the minimum
or maximum extent of adjustment. The ad-
juster may be damaged.
INSP
ADJ
Minimum
20 clicks out
(from maximum
position)
Publicité
Table des Matières
