Possible Malfunctions - Bartscher IK 30S-EB Mode D'emploi

7. Possible Malfunctions

Error code
• No cooking pot present on
E0
• Device overheats
E01
• Parts are damaged (ie.
• Overheating protection is on,
E02
• Short-lasting power
E03
Cause
the cooking surface or the
pot is not suitable for
induction cooker.
excessively (for instance,
ventilation is covered).
transistor).
the device switched itself off.
surge or voltage too low.
Solution
• Do not turn the device without
cooking pots present. Only use
cooking pots and pans suitable
for induction cooker.
• Uncover ventilation clearance.
Leave the device for a few
minutes to cool down, and after
that, try to use it again. If, after
cooling, the display still shows an
error code, contact retailer.
• Contact retailer.
• Remove the cooking pot from the
plate. Wait for a few minutes until
the device cools down. After that
time, the device is ready to be
used again.
• Disconnect the device from the
mains (remove the plug!). After
several minutes connect again.
- 35 -