Operation - Bartscher IK 30S-EB Mode D'emploi

•
Do not place the induction cooker next to devices or objects, which react sensitively
to magnetic fields (e.g. radios, TVs, etc.).
WARNING! Hazard via electrical current!
The device can cause injuries due to improper installation!
Before installation the local power grid specification should be compared with
that of the device (see type label).Connect the device only in case of compliance!
Take note of the safety advice!
•
The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.
•
The device should be placed in an area with easy access to the plug, in order to
quickly remove it from the socket if necessary.

5.5 Operation

Turning on
•
Connect the device to a single, earthed socket.
•
An acoustic signal should be emitted and a red ON Standby indicator light above
the ON/OFF button
•
Put a suitable cooking pot with dish in the middle of a chosen cooking plate.
CAUTION!
Never put empty cooking pots and pans on the cooking plates. Heating an empty
pot or pan will cause overheating protection to activate and the device will
switch off.
•
In order to turn device off press the ON/OFF button
NOTE!
If no settings or adjustments are made during the next minute, the device will return
to the standby mode.
will turn on. Device is in standby mode.
.
- 31 -